Only 8 spots left$15 $2/seat/month for life for the next 8 founding teams.Claim your spot →

Twilio dialer

Twilio geo permissions: choose the countries your account can call

Twilio geo permissions are the per-country settings that decide which numbers your account may call. An Owner or Administrator sets them under Voice > Settings > Geo permissions, ticking each country’s low-risk or high-risk ranges and saving, which takes about two minutes (Twilio guide). A blocked call logs warning 13227. Rapidialer calls through your own Twilio account, so these settings decide where your team can dial.

Updated · Reviewed by Jaffar Jawed

Key takeaways

  • The Console path is Voice > Settings > Geo permissions, and only the Owner and Administrator roles can change it.
  • Twilio recommends low-risk destinations only for sales dialers and outbound contact centers.
  • A <Dial> call to a blocked destination logs warning 13227; REST API calls log 21215 and SIP trunk calls 32205.
  • New Twilio trial accounts can call only their sign-up country and only low-risk destinations.

What do geo permissions protect, and what do they block?

  • A call to a destination your settings don’t allow is blocked before it connects, and the only trace is warning 13227 in the Debugger for <Dial> calls, the kind Rapidialer places (Twilio error 13227).
  • Every country you switch on is somewhere toll fraud can send calls on your bill, and the account that placed them pays for every minute (Twilio: what is toll fraud?).
  • A new subaccount inherits the parent project’s permissions, so a country switched on in the parent is on in the dialer’s subaccount too, until you turn inheritance off there (Twilio geo permissions guide).

How do you enable a country in the Twilio Console?

  1. Open Geo permissions

    In the Twilio Console, go to Voice > Settings > Geo permissions; the legacy Console uses the same path. Only the Owner and Administrator roles can change it (Twilio geo permissions guide).

  2. Switch on the countries you call

    Find each country and tick its Low-Risk numbers. For sales dialers and outbound contact centers, Twilio recommends low-risk destinations only (Twilio geo permissions guide).

  3. Check a number you’re unsure of

    The Phone Number Permission Check on the same page shows whether a number sits in a high-risk range. Twilio doesn’t publish those ranges.

  4. Save, then test

    Click Save and place a test call. If it still fails, search Twilio’s Debugger for 13227 (Twilio Debugger docs).

What is the difference between low-risk and high-risk ranges?

Low-risk ranges are the numbers Twilio considers safe to call, which covers most mobile and landline ranges in a country. High-risk ranges come in two kinds: special services, such as premium-rate, shared-cost and paid-for lines, and narrow ranges Twilio has tied to toll fraud, a list it refreshes automatically several times a month and doesn’t disclose (Twilio geo permissions guide).

A sales team almost never needs a high-risk range: prospects answer on ordinary mobiles and landlines. Leaving the high-risk box clear blocks calls to those numbers even in a country you have switched on, which is the protection you want. Trial accounts can reach low-risk destinations only, and a new trial is limited to its sign-up country until it is upgraded (Twilio trial docs, checked November 2026).

Why does Twilio switch some countries off?

To protect your account from toll fraud, also called International Revenue Share Fraud (Twilio Verify docs). An attacker uses an application to place many calls to international premium-rate numbers they profit from, and the account that placed the calls pays for each minute (Twilio: what is toll fraud?). Twilio names this traffic pumping as the most common Programmable Voice fraud (Twilio Anti-Fraud Developer’s Guide).

So the safest list is the shortest: the countries you really call, low-risk ranges only, reviewed when your territories change. Twilio’s fraud guide lists the warning signs to watch on your usage (Twilio fraud response guide): a sudden rise in voice spending, many calls to premium-rate or unusual international numbers, and calls that last unusually long. In Rapidialer only signed-in reps can place calls, one at a time, which narrows that risk but doesn’t remove it.

What does Twilio error 13227 mean, and how do you fix it?

Error 13227 means a <Dial> call tried to reach a number your geo permissions don’t allow; Twilio titles it “Geo Permission configuration is not permitting call” (Twilio error 13227). The fix is to switch on the country, or the range the number is in, then call again. The code depends on how the call was placed:

  • 13227 for TwiML <Dial> calls, which is how Rapidialer connects every call, including the leg to a rep’s forwarding mobile.
  • 21215 for calls created through the Programmable Voice REST API.
  • 32205 for Elastic SIP Trunking calls.
  • Still blocked after enabling the country? Run the Permission Check: the number may sit in a high-risk range, or the call may come from a subaccount that has inheritance turned off.

What does a call to another country cost on Twilio?

Each destination has its own per-minute rate, the same whether the call comes from the REST API or <Dial> (Twilio Help Center), and mobiles often cost more than landlines. Prices on this site, including the guide to Twilio’s per-minute rates, are US rates, so check the destination’s page before you budget a list abroad. Browser calls add the $0.004 a minute Voice SDK leg to every rate below. A UK mobile list therefore costs about $0.0345 a minute from a browser, almost twice the $0.018 of a US call, which matters when you plan minutes for a team calling both markets.

Twilio outbound rates by destination (Twilio US and UK voice pricing pages, checked November 2026)
DestinationPer minuteLocal number in that countrySource
US mobile or landline$0.014$1.15 a monthTwilio US pricing
UK landline$0.0158$3.50 a monthTwilio UK pricing
UK mobile$0.0305$3.50 a monthTwilio UK pricing
Alaska$0.0945Not applicableTwilio US pricing

How do geo permissions decide where Rapidialer can call?

Rapidialer places every call through your own Twilio account and keeps no country list of its own, so your team can dial exactly the countries that account allows, at Twilio’s rate for each. It doesn’t read your geo permissions or explain a blocked call: the call fails to connect, and the reason is in Twilio’s Debugger.

  • Store numbers with their country code. Ten digits are read as a US or Canadian number, so give other numbers a + and country code before a CSV import; the E.164 phone number formatter converts a column. On the Dialer keypad, hold 0 to type +.
  • Forwarding mobiles count. A teammate’s forwarding mobile in another country is an outbound call to that country, so the country must be on.
  • Calling hours follow the contact’s clock. Calling hours are checked in the time zone worked out from each number, so set an organization fallback time zone for countries with several zones.

When is Rapidialer not the right fit for international calling?

When you need numbers or rates Rapidialer can’t give you. It sells no minutes, so international calls cost exactly what Twilio charges, and a destination Twilio doesn’t serve stays out of reach. It also buys no numbers: to show a local caller ID abroad you buy that country’s numbers in Twilio, which may need a regulatory bundle.

Teams that call many countries at high volume, need predictive dialing, or want a vendor to handle number compliance country by country are better served by a contact-center platform. Rapidialer suits a team that dials with its power dialer, or with parallel dialing on up to five lines per rep, into a short list of countries it has switched on.

Which Rapidialer features does this use?

Which teams use it this way?

Twilio geo permissions: questions and answers

Where are geo permissions in the Twilio Console?

Under Voice > Settings > Geo permissions, in both the 2026 and the legacy Console. Only users with the Owner or Administrator role can change them. Each country has a Low-Risk and a High-Risk checkbox; tick what you need and click Save. Twilio’s Dialing Permissions API reads and changes the same settings if you manage many subaccounts.

What does Twilio error 13227 mean?

A TwiML <Dial> call tried to reach a number your account isn’t enabled to call, so Twilio blocked it before it connected. Switch on the destination country, or the high-risk range the number sits in if you really need it, then call again. The Phone Number Permission Check on the Geo permissions page shows which range a number is in.

Which countries should a sales team enable?

Only the countries on your call lists, and only their low-risk ranges, which is what Twilio recommends for sales dialers and outbound contact centers. Every extra country is another place toll fraud could send calls on your bill. Review the list when your territories change, and switch off countries you stopped calling.

Do Twilio subaccounts have their own geo permissions?

Yes, but a new subaccount inherits them from the parent project by default. To give a subaccount its own list, turn off inheritance in its Console; Twilio copies the parent’s settings into the subaccount, and you adjust them there. A subaccount that still inherits changes whenever the parent’s settings change.

Can Rapidialer call international numbers?

Yes, in any country your Twilio account’s geo permissions allow. Twilio bills each call at that destination’s rate, for example $0.0305 a minute to a UK mobile, plus the $0.004 browser leg; Rapidialer’s $15 per seat a month doesn’t change. Store each number with a + and its country code so it isn’t read as North American.

Can a Twilio trial account call other countries?

Not at first. Twilio’s trial docs say trial calls are restricted to your sign-up country and go only to verified numbers, up to five, and trials can reach low-risk destinations only. Upgrade the account, then switch on the countries you need under Geo permissions before your team starts calling abroad.

Start today

Import your list and make your first call today

Connect Twilio, upload a CSV and start dialing.