Only 8 spots left$15 $2/seat/month for life for the next 8 founding teams.Claim your spot →

Guide

Internal Do Not Call List Requirements

The federal requirements for a company-specific do-not-call list, the FCC’s 2026 opt-out order, and how to run a list that stops the next call.

Updated · By

Key takeaways

  • 47 CFR 64.1200(d) requires a written do-not-call policy available on demand, trained staff, and requests recorded and honored within 10 business days.
  • The 10-business-day limit took effect on April 11, 2025, replacing the earlier 30 days.
  • A do-not-call request must be honored for five years from the time it was made.
  • FCC order 26-67, published at 91 FR 67214 and effective November 25, 2026, lets callers designate exclusive opt-out methods for robocalls and robotexts if they disclose them clearly.
  • The TSR safe harbor requires calling from a registry copy no more than 31 days old, plus written procedures, training and monitoring.

The internal do not call list requirements in federal law apply to any company making telemarketing calls to consumers. Under 47 CFR 64.1200(d) you need a written policy available on demand, trained staff, a record of each request, and a process that honors it within 10 business days and keeps honoring it for five years. The FTC’s Telemarketing Sales Rule also bans calling anyone who asked you to stop. Laws checked November 2026; this is not legal advice.

The list is separate from the National Do Not Call Registry: the registry records people who refuse telemarketing in general, while your list records people who refused your company. This guide summarizes the federal rules from their primary sources. State laws add their own, so ask a lawyer to review your program.

What does 47 CFR 64.1200(d) require?

The FCC’s rule sets six minimum standards for a company-specific do-not-call list, and a company may not make telemarketing calls to residential subscribers until it has procedures that meet them (47 CFR 64.1200(d)):

RequirementWhat it means in practiceRule
Written policyA written do-not-call policy, available upon demand64.1200(d)(1)
TrainingEveryone involved in telemarketing is informed and trained in the list’s existence and use64.1200(d)(2)
Recording and honoringRecord each request with the person’s name, if given, and number; honor it within a reasonable time not exceeding 10 business days64.1200(d)(3)
IdentificationGive the caller’s name, the company’s name and a phone number or address for contact64.1200(d)(4)
AffiliatesA request covers affiliates only if the person would reasonably expect it to64.1200(d)(5)
RetentionKeep and honor each request for five years from the time it was made64.1200(d)(6)

The FTC’s Telemarketing Sales Rule adds a flat ban: calling a person who has said they do not want calls from that seller is an abusive practice (16 CFR 310.4(b)(1)(iii)(A)). The FCC rule gives you time to process a request; the TSR gives you no grace period for the call itself.

When did the 10-business-day limit start?

The 10-business-day limit took effect on April 11, 2025. Before then, the FCC allowed up to 30 days to honor a do-not-call request. The change came from the FCC’s 2024 consent-revocation order, FCC 24-24, whose Federal Register notice set April 11, 2025 as the effective date for the new paragraph (d)(3) (Federal Register, October 11, 2024). A later FCC order confirmed that compliance with (d)(3) was required from that date, even while another part of the 2024 rules was delayed (DA 25-312).

Ten business days is the outer limit, not a target. A list that takes a week to update still leaves days in which a rep can call someone who asked to be left alone, and under the TSR that call is a violation on its own. Most teams therefore block a number the same day, and treat the 10 days as the time allowed to sweep other systems: a CRM, a marketing tool, a vendor’s calling list.

What does the FCC’s 2026 opt-out order change?

The FCC adopted Report and Order FCC 26-67 on September 30, 2026 and released it on October 1, 2026 (FCC 26-67). It rewrites how people revoke consent to robocalls and robotexts in three ways. Callers may designate exclusive revocation methods, such as a key-press opt-out on the call, standard reply words to a text, or a named website or phone number, if they disclose them clearly and conspicuously. An opt-out from an informational message may cover only that category of message, while an opt-out from telemarketing still revokes consent for all of that caller’s telemarketing. And the narrowed rule replaces the earlier “revoke-all” provision, whose waiver had been extended to January 31, 2027 (DA 26-12).

The order keeps the 10-business-day deadline. Its further notice asks whether to cut it to seven business days and whether to change the affiliate standard in (d)(5). The Federal Register published the order on October 26, 2026 at 91 FR 67214, and the notice states that the rules take effect on November 25, 2026. Opt-outs must still be honored within 10 business days. For live calls made without consent, the practical rule is unchanged: when someone asks you to stop, add them to the list and stop.

How does the TSR safe harbor work?

The TSR offers a safe harbor for honest mistakes, but only to a company that can show a working program. A seller or telemarketer is not liable for a call to a listed number if it shows that, as routine practice, it has written procedures, trains its staff, keeps a list of numbers it may not call, uses a process that blocks those numbers and the registry’s from a copy obtained no more than 31 days before the call, keeps records of that process, and monitors and enforces all of it (16 CFR 310.4(b)(3)). The call itself must also be an error.

The FCC’s rules contain a parallel safe harbor built on the same elements (47 CFR 64.1200(c)(2)). Both reward evidence. A policy that exists only in a shared drive, training nobody signed off on, or a list that one rep keeps in a spreadsheet will not carry the defense. The registry half of the work is covered in DNC scrubbing.

How do you run an internal do-not-call list well?

Run one list for the whole company, check it before every dial, and keep a dated record of every entry. Eight habits make that real:

  • Capture requests everywhere. Requests arrive on calls, by email, through web forms, by text and in person; every channel needs a path into the same list.
  • Act immediately. Block the number the moment the request is made, whatever the 10-day allowance says.
  • Keep one list. A request made to one rep or campaign applies to every rep and campaign selling for that company.
  • Check before every dial, not just at import. Lists live for weeks; yesterday’s request has to stop today’s call.
  • Normalize numbers. Store numbers in E.164 (+1 and ten digits) so “(512) 555-0123” and “5125550123” match.
  • Keep an audit trail. Record who added each number, when, from which channel and why.
  • Share the list with vendors. An agency or call center calling for you is calling on your behalf.
  • Retire numbers carefully. Remove a number only after five years, or when the person clearly asks to hear from you again, and record why.

Caller ID matters too: every number you call from should ring somewhere a person can take a removal request, as the guide to Twilio phone numbers for cold calling explains.

How is an internal list different from the national registry?

An internal list binds your company to the people who refused you; the national registry binds every telemarketer to the people who refused telemarketing. The differences decide which list stops which call:

Internal do-not-call listNational Do Not Call Registry
Who adds numbersPeople who ask your company not to callConsumers, through the FTC’s site
Who it bindsYour company and anyone calling for itAll telemarketers, with exceptions
Existing customersA request still stops the callsAn established business relationship allows calls until the person asks you to stop
How long it lastsFive years per requestUntil the consumer removes the number or it is disconnected
Your jobRecord, honor and keep requestsScrub lists against a copy no more than 31 days old

You need both for consumer telemarketing, and both sit inside the wider rules on whether cold calling is legal, including calling hours by state.

How does Rapidialer’s Do Not Call list work?

Rapidialer keeps one internal Do Not Call list for your whole organization and checks it before every outbound call. Numbers get on it three ways: a rep logs the DND call outcome in wrap-up; an owner or admin adds up to 1,000 numbers at a time with an optional reason; or an owner or admin imports a CSV of up to 20,000 numbers. Each entry keeps its source, and logging DND also closes the lead’s open list entries and cancels its open follow-ups.

Rapidialer checks the list when a call is created and again when Twilio asks for the call’s instructions, so a listed number is blocked from the web Dialer, a lead page and the Chrome extension alike. Numbers are stored in E.164, so formatting differences do not let a number slip through. Only owners and admins can remove entries, which matches the team roles most compliance policies ask for.

When is Rapidialer not the right fit for do-not-call compliance?

Rapidialer handles the blocking half of an internal list; the paperwork half stays with you. Pick a dedicated compliance platform, or add one alongside, if you need any of these:

  • Registry and state-list scrubbing. Rapidialer does not check the national registry or state lists.
  • Requests from other channels. Requests made by email or through a web form are not added to the call list for you; an owner or admin has to enter them.
  • Policy and training records. Rapidialer stores the list, not your written policy or training sign-offs.
  • Automatic five-year expiry. Entries stay until an owner or admin removes them.

For a team that calls from one place and needs a list every rep and every dialing surface respects, that is usually enough. Ask a lawyer to review the written policy that sits around it.

Questions and answers

How long do I have to honor a do-not-call request?

Under the FCC’s rules, within a reasonable time that may not exceed 10 business days from receipt, and then for five years from the time the request was made. Because the Telemarketing Sales Rule separately prohibits calling someone after they asked your company not to call, the safe practice is to block the number the moment the request is made.

Do I need an internal do-not-call list for B2B calls?

The federal requirements are written for telemarketing calls to residential subscribers, which the FCC extends to mobile numbers, and most calls to businesses fall outside the TSR’s do-not-call rules. Honoring business requests is still good practice, many prospects answer on personal mobiles, and a request ignored on a mixed list can become a consumer claim. Treat every request the same way.

Does an internal list replace scrubbing against the national registry?

No. They do different jobs. The National Do Not Call Registry covers consumers who opted out of telemarketing in general, while your internal list covers people who opted out of your company’s calls, including existing customers. Consumer telemarketing needs both: scrub against a registry copy no more than 31 days old, and check your own list before every call.

What must a written do-not-call policy include?

The FCC’s rule says the policy must exist in writing and be available on demand; it does not prescribe a format. In practice it describes how requests are collected on every channel, who adds them to the list, how quickly they take effect, how long they are kept, how staff are trained and how compliance is checked. Keep dated versions so you can show what applied when.

Does a do-not-call request cover my affiliated companies?

Only sometimes. Under 47 CFR 64.1200(d)(5), a request applies to the company that made the call, or on whose behalf it was made, and extends to affiliated entities only if the consumer would reasonably expect them to be included, given the company’s identity and the product advertised. The FCC’s 2026 notice asks whether to change that standard, so watch for updates.

What changed with the FCC’s October 2026 opt-out order?

The FCC adopted order 26-67 on September 30, 2026, and the Federal Register notice (91 FR 67214) makes it effective November 25, 2026. It lets callers designate exclusive methods for revoking consent to robocalls and robotexts if they disclose them clearly, and lets an opt-out from informational messages cover only that category, while a telemarketing opt-out still covers all of that caller’s telemarketing. It keeps the 10-business-day deadline.

Start today

Import your list and make your first call today

Connect Twilio, upload a CSV and start dialing.